ATT-Series

---

 

ATT-0025 Technical details and Dimension

Autotaps Features

Easy installation
Built-inthermostatic valve
Manual temperature control lever 
Hygienic and upto 70% water conservation
4XAA Alkaline batteries
Hands free and reliable infrared activation technology
Exquisite and stylish designs
Solid brass construction
Flexible supply hoses

Note:

Gravity-fed water supply users:

The pressure from a gravity-fed water supply (in most case 'hot' supply) will not be sufficient enough for this tap to work to its full capacity. For example, if the pressure of 'cold' supply is higher than 'hot' supply, then the water temperature will be cold.

You'll need at least 0.75 bar pressure in order for the hot supply to work properly. A pressure pump/booster can be used to increase the water pressure.

In summary, the pressure of 'hot' and 'cold' supply feeds must be equal for the temperature control to work properly.

ATT-0025/ATT-0025-2

Technical details:

Hottest temperature: 36°C
Coldest temperature: 25°C
Diameter of 'inlet' pipe: G1/2”
Diameter of 'inlet' pipe: G1/2”
Water pressure range: 0.5-7 Bar
Voltage: DC6V
Power consumption: ≤0.3MW
Sensing distance: 27-31cm
Respond time: 1 Second
Electricity Consumption: 4xAA alkaline batteries (2 years)
Silent Consumption: 0.003W
Environment Temperature: 1-45 C

NOTE:

 

Temperature Control:

 

Temperature Gauge 1. Hot Section Water is not fully hot Hottest temperature: 36°C 2. Neutral Section Water is mixed, but it's more colder 3. Cold Section Water is cold, but slightly mixed with hot water Coldest temperature: 25°C

 

Dimension: